Advanced Functions - LIGHT OBJECT LO-E5 Manual

10

Advanced Functions

Only use this tab only when using the rotational
function on the laser machine. This is only for
engraving on round/circular objects.
Enable Rotate Engrave: If selected, will make the
outputting data of common engraving to be
automatic.
Rotate axis con(um): When setting x-axis as the
rotation axis, engraving method must be [one-way
vertical] or shifted to rotate engrave data for it to
realize the function of rotating engraving. For [two-
way vertical], set Rotate axis control to be value of X
axes pulse unit. When setting Y-axis to be rotation
axis, engraving method must be [one-way
Horizontal] or [two-way Horizontal], set rotate axis
control to be value of Y axes pulse unit.
Step per rotate (pulse): Pulse numbers required
from motor driver when rotation axes makes 1 cycle
Current diameter: Diameter of engraving objects.