Dexcom one User Manual page 79

Follow the instructions to clean and disinfect the
receiver and transmitter between patients.
1. Prepare receiver
a. Charge and reset receiver:
• Resetting the receiver removes the previous
patient's data. To ensure patient privacy, reset
the receiver after each use.
b. Clean and disinfect
• See instructions in the Storage and
Maintenance section in Appendix C.
2. Clean transmitter
a. Prepare
• Protect: Wear clean gloves and goggles
• Prepare Soak: Put Clorox Healthcare
Bleach Germicidal Cleaner solution (Clorox)
in a container deep enough to submerge the
transmitter
b. Clean
• Rinse and Scrub: Rinse transmitter in cold tap
water while brushing with a soft bristle brush
until all visible soil is gone
• Soak and Scrub:
• Put transmitter in prepared soak for 3
minutes
• While immersed, scrub uneven areas (see
green arrows) with a soft bristled brush or
a pre-saturated bleach wipe
Dexcom ONE User Guide
Professional use instructions
®
77