Chapter 6 Starting A New Sensor Session; Remove Your Sensor - Dexcom one User Manual

Chapter 6
Starting a new sensor
session
Each sensor session lasts 10 days.
Settings show when your current session ends.
Your Dexcom ONE alerts you when you have 24
hours left in your session, then 6 hours, 2 hours,
and finally, 30 minutes.
A final alert lets you know your session has ended.
When you get that alert, follow the steps in this
chapter to remove your current sensor and start a
new one.
To start a new session before the sensor expires
completely, follow the instructions in Appendix A:
Troubleshooting.
Remember, after your sensor session has ended,
you will not get any sensor readings. To resume
getting sensor readings, follow the steps below to
remove the old sensor, then insert a new one, and
complete the sensor warmup.

6.1 Remove your sensor

Follow these steps to:
• Take your sensor off your body.
• Remove your transmitter from the holder.
Dexcom ONE lets you know when to replace
sensor.
App
No Alerts
1
Remove Sensor Now
No readings or alerts until you start a new
sensor.
Sensor Removal Instructions
Dexcom ONE User Guide
Starting a new sensor session
Sensor Expired
OK
Receiver
10:30
Sensor Expired
Remove sensor now.
No readings or alerts until you
start a new sensor.
Start New Sensor
Dismiss
50%
37