System Disposal - Dexcom one User Manual

2. Wipe
• Using moderate pressure, wipe the receiver
all over, 3 times up-and-down and 3 times
side-to-side, to remove all dirt or soil
3. Let air dry
To disinfect
1. Repeat cleaning instructions using a new bleach
or ammonium wipe.
2. Wipe receiver until completely wet. Use wipe to
keep receiver wet for 2 minutes.
3. Let air dry.
Tips
• Don't get water or other fluids inside the
receiver through openings like the USB port
• Don't use anything abrasive on the receiver
• If the receiver has a screen protector, remove it
before cleaning and disinfecting
• Using alcohol wipes to clean the receiver hasn't
been tested
Use correct transmitter and
sensor
• Dexcom ONE components are not compatible
with any previous Dexcom products. Do not
mix transmitters, receivers, and sensors from
different generations.
C.2 System disposal
Different regions have different requirements for
disposing of electronics (transmitter) and parts that
have come in contact with blood or other bodily
fluids (sensor). Follow your area's local waste
management requirements.
Dexcom ONE User Guide
Taking care of yourDexcom ONE
53