Viavi ONA-800 Getting Started Manual page 49

Chapter 2 Setting up the system
Synchronizing to the StrataSync server
2 Verify that the server address appears in the Server Address field. The default
server address is stratasync.viavisolutions.com.
3 Enter the ID of the unit in the Account ID field.
Synchronization cannot occur without the entry of a pre-approved, unique account
ID obtained from VIAVI. Ensure that an account ID is available before attempting
to access the StrataSync server.
4 Optionally, enter an ID in the Technician ID field.
A default technician ID is provided. This ID can be modified at any time.
5 Select Start Sync to initiate a connection to the StrataSync server.
Synchronization begins when a connection to the server is established.
NOTE
During Synchronization, icons indicating the progress and either the failure or completion of the
process are displayed.
When an error or failure occurs, a message appears, detailing the possible issue.
Page 30
ONA-800 Getting Started Guide
22142812, R011 April 2022