Wired Ethernet Connection; Wifi Connection - Viavi ONA-800 Getting Started Manual

connection to the instrument, verify that port 22 (SSH) or 443 (HTTS) is open on your
workstation.

Wired Ethernet Connection

Figure 33
connection to the Internet. Before establishing a wired connection, you need to 1) deter-
mine the instruments IP address and, 2) configure the network proxy (if a proxy is
used).
Figure 33 Wired Ethernet Connection

WiFi Connection

Figure 34
tion.
Figure 34 WiFi Connection
April 2022
NOTE:
To connect using WiFi, the WiFi option must be installed on the target test instrument.
To order the option, or to determine whether a particular Smartphone has been quali-
fied by Viavi for the purpose of establishing remote connections to the instrument,
contact VIAVI Customer Care at 1-866-228-3762 or
illustrates a test instrument connected to a workstation via a wired Ethernet
illustrates a test instrument connected to a workstation using a WiFi connec-
ONA-800 Getting Started Guide
22142812, R011
Chapter 4 Smart Access Anywhere
Establishing a connection
www.viavisolutions.com.
Page 45