Download Print this page

Electrics - Insignia AIO 7.5kW Installation Manual

Signature12kw steam generator

Advertisement

Electrics:

All circuits should be installed by licensed electricians and conform to local and national codes.
Power supply must be cut off before installation, maintenance and repair. Pressing the on/off button on the controller will NOT cut off the power
supply. Always turn off at the mains.
No additional power supply or wire is allowed to connect to the generator. Do NOT connect the earth wire to the neutral/null wire.
Only the original parts and elements from our factory are allowed to be used in installation, operation, maintenance and repair.
After the installation of the pipeline and electrical circuits, careful checking must be performed before switching on the generator.
The generator has been carefully installed, checked and tested; therefore the user only needs to install the power wire.
The power supply should be 215-240V for single phase or 380-415V for three phase, 50/60Hz.
The selection of fuse and breaker must strictly follow the data in the table on page 5. Choose the suitable power wire according to the table on page 5
and local codes.
Take off the back cover of the generator, insert the 3-core (1 live, 1 neutral/null and 1 earth) power wire (single phase, 215-240V, 50/60Hz ) or 5-core (3
lives, 1 neutral/null and 1 earth) power wire (three phases 380-415V, 50/60Hz) into the hole at the back of the generator case and connect to the
correct terminal. Tighten the wire terminal to prevent the wire(s) becoming loose and potentially arcing the power and damaging the unit.
Single phase, 215-240V,50/60Hz power supply:
Connect the live wire to the terminal labeled as "L"; connect
the neutral/null wire to the terminal labeled as "N" ; and
connect the earth wire to the terminal labeled as "
www.insigniashowers.com
Three phases, 380-415V,50/60Hz power supply :
Connect the 3 live wires to the terminal labeled as "L1", "L2" and "L3"
respectively; connect the null wire to the terminal labeled as "N"; and
connect the earth wire to the terminal labeled as "
".
Last Modified: 06/05/2022
".
34

Advertisement

loading

Related Products for Insignia AIO 7.5kW

This manual is also suitable for:

Aio 10.5kwAio 12kwAio 15kwAio 18kw