Page 3
10" Steam Iron Always disconnect the iron from the electrical outlet before filling the iron with water, emptying the water from the iron, and when the iron is not in use. Do not operate the iron with a damaged cord or in the event the iron has been dropped or damaged.
NS-IR10BK6 Features Package contents • 10" steam iron • User Guide Main features Burst of Steam pump Spray pump Power cord Temperature Steam control knob indicator light Water inlet cover Temperature Spray nozzle control dial Sole plate Using your iron...
10" Steam Iron Setting the temperature control • Always check the garment label for ironing instructions before ironing the garment. • If the ironing instructions are missing, use the table below to set the temperature. • Sort your laundry into fabric types (wool with wool, cotton with cotton, and so on), then iron the fabrics requiring the lowest temperature setting first, then progress to fabrics that require higher temperatures (the iron heats up quicker than it cools down).
NS-IR10BK6 Steam ironing The steam feature can only be used at higher ironing temperatures. Use the following settings: Use for moderate steam Use for maximum steam Open the water inlet cover and fill the iron with water. Stand the iron upright and plug it in.
10" Steam Iron Using the Burst of Steam This feature provides an extra amount of steam to help remove stubborn wrinkles. Open the water inlet cover and fill the iron with water. Stand the iron upright and plug it in. Turn the temperature control dial to the maximum setting.
NS-IR10BK6 Storing your iron Turn the temperature control dial to OFF and set the steam control knob to 0 (no steam). Unplug the iron. Pour any remaining water out of the water reservoir. Stand the iron upright and let it cool down completely.
Page 9
10" Steam Iron PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Brown streaks You are using chemical Do not add any descaling agents to the come through the descaling agents. water in the water tank. sole plate and You are not using the right Use the self-clean function and refer to stain the fabric type of water.
NS-IR10BK6 Specifications Dimensions (W × D × H) 10.2 × 4.2 × 4.9 inches (25.8 × 10.6 × 12.4 cm) Weight 2 lbs. (875 g) Power 1200 W This marking indicates that this product should not be disposed with other household wastes throughout the EU.
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you.
Page 12
• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes. REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.