Advertisement
Accessories Installation: Commercial Mode — Fast Steam
Commercial mode-fast steam function is designed for commercial use in places like spa centers, health clubs, etc. Under commercial mode, the water tank
always keeps the water temperature at
in approx. 30 seconds and runs for 30 minutes. After this time, the system will the revert back to stand by (Heat preservation state).
Create the housing hole for the back box and install fast
steam switch over the front of the box feeding the wire
through the conduit.
The steam generator has two settings, domestic and commercial. To change between the two settings, cut off
the general power supply, then switch the button inside the central function box.
The active setting is highlighted on your control panel interface when switched on.
www.insigniashowers.com
80°C,
once the customer enters into the steam room and presses the "fast steam" switch, the steam will come out
Last Modified: 06/05/2022
30
Advertisement
