ElectrIQ eiQCHB60B Installation And User Manual page 11

CARBON FILTER（OPTIONAL）
Activated carbon filters should be used to trap odours (optional – available from the same
stockist you purchased the hood from) and must be used if the hood is not vented to the
outside.
Reference: eIQCF160 Carbon Filter Pack
In order to install the activated carbon filters, the
aluminium filter should be removed first. Press the
lock and pull it downward as below:
• Make sure the filter is securely locked. Otherwise, it could loosen and cause damage
to the unit.
• When the activated carbon filters are attached, the suction power will be lowered.
• The charcoal filter cannot be washed or recycled. It should be changed at three or
six months according to the amount of use the hood receives. Replacements are
available from the stockist you purchased the hood from.
eIQCF160 Carbon Filter Pack
Put the activated carbon filter onto the end of the
motor unit and turn it in anti-clockwise direction.
Repeat the same on the other side (see diagram)
NOTES:
11