Table of Contents
Advertisement
10. Pull up the inner chimney and fix it into inner
chimney bracket with 2 x screws (4mm x
8mm).
12. Before usage, read all the instructions and make sure that the voltage (V) and the
frequency (Hz) indicated on the identification plate (found inside the cooker hood) and all
the data inside the appliance are exactly the same as the voltage and frequency in your
home. Then plug the power lead into the power socket (or if connecting directly to the
main via a switched spur, ensure the work is carried out by a competent, qualified
person) and the cooker hood is then ready for use.
11. Remove the Aluminium filter and fix to
the wall with 2 x screws (4mm x30mm)
through the safety holes.
10
Advertisement
Table of Contents
