5.12.2
Selecting a Program
44
Laser Surgical Unit diomax
List of previously used programs (Last used
programs)
Up to four program names are directly displayed
in the main menu. The four program names are
those of the most recently used programs.
Activate rotary knob by pressing it and
•
select program by turning the rotary knob.
The parameters of the selected program are
shown on the display.
For information on adjusting the parameters,
see section 5.12.3 "Program change", page 46.
Selecting a different program
All programs are managed, displayed and
selected in the Programs menu.
Select the Programs menu.
•
— The Programs menu is active, and the
text Select parameters is displayed in
the information line.
Activate the Select function.
•
Instructions for Use
®
1550
Revision 2