Table of Contents
Advertisement
5.1.4
Laser Signal Light
32
The laser signal light shows the following statuses:
Off
•
Laser fiber correctly connected to the SMA-X socket.
Foot switch not activated.
Red
•
Laser fiber not connected.
Yellow
•
LASER READY and activated foot switch:
Laser light emission.
— Permanent yellow light:
During continuous laser operation as long as the
foot switch is activated.
— Flashing yellow light:
During laser pulse operation the signal light is on
during the pulses. It is off during pulse pauses.
Red: Flashing
Device malfunction.
See section 8 "Cleaning and Disinfecting", page 62.
Instructions for Use
Laser Surgical Unit diomax
®
1550
Revision 2
Advertisement
Table of Contents
