Using The Kbd Sample Utility Functions - Roland Fantom-06 Reference Manual

3 .
Edit the desired parameters.
Parameter Value
FWD
ONE-SHOT
Loop Mode
REV
REV-ONE
0 (C -1) –127
Original Key
(G 9)
Gain
0, +6, +12 [dB]
-50.0–+50.0
Fine Tune
[cent]
Level 0–127
MEMO
Parameters that have been changed are marked with an edit mark.
Explanation
After the sample
plays back
from its start to
Start Loop
end points, it
repeatedly plays
back from its loop
start point to its
end point.
The sample plays
Start Loop
back only once
from its start to
end point.
The sample plays
back repeatedly
from its end to
Start Loop
start point (in
reverse). The loop
point is disabled
in this case even if
you have set it.
The sample plays
Start Loop
back only once
from its end to
start point (in
reverse).
Sets the note number that plays
back the sample at the same pitch
at which it was recorded.
Adjusts the sample gain. Use this
to raise the volume if the level of
the recorded sample seems too
low.
Sets the pitch of the sampled
sound in one-cent steps (±50
cents).
Adjusts the sample volume.
Editing Multisamples and Kbd Samples

Using the KBD SAMPLE UTILITY Functions

On some screens such as KBD SAMPLE WAVE EDIT, KBD SAMPLE
LIST and SAMPLE PARAMETER, you can use the SAMPLE UTILITY
function to perform various tasks like changing the names of
samples, moving, copying and so on. The menu is different for each
End
screen.
1 .
In a screen where the utility functions are
available, select the desired sample(s).
End
You can select the check boxes of samples for multiple
selections.
2 .
Touch <UTILITY>.
The KBD SAMPLE UTILITY screen appears.
End
End
3 .
Select and execute the desired function.
Menu
CREATE
MULTISAMPLE
ASSIGN TO KEYBOARD
DELETE
MOVE
COPY
IMPORT
RENAME
* The menu items that can be selected are different for each
screen. Also, the menu items change depending on how many
samples are selected.
Explanation
Creates a multisample using samples
whose check boxes are selected. Switches
to the CREATE MULTISAMPLE screen.
Lets you use the keyboard to play the
sample indicated by the cursor.
Specify the Destination Tone in the
window that is displayed.
Deletes the sample selected by the cursor.
All samples whose check boxes are
selected are deleted at once.
Moves the sample selected by the cursor.
Specify the destination in the window that
is displayed.
Copies the sample selected by the cursor.
Specify the copy destination in the
window that is displayed.
Imports an audio file into the KBD SAMPLE
LIST.
Renames the sample.
89 89