Editing The System-Wide Effects - Roland Fantom-06 Reference Manual

Editing the System-Wide Effects

Here's how to edit the MASTER FX (M.COMP, M.EQ) that are common
to the entire system.
1 .
In the EFFECTS EDIT screen, touch the INTERNAL
tab.
INTERNAL tab
2 .
Select a zone.
Turning each effect on/off
3 .
In the screen, touch <M.COMP> or <M.EQ> to turn
the effect on/off.
Editing the parameters
3 .
In the section that you want to edit, touch <EDIT>.
The EFFECTS EDIT ZOOM screen appears.
In this screen, you can edit major parameters such as the
M.COMP/M.EQ/TFX on/off status.
4 .
Move the cursor to the desired parameter, and
edit the value.
5 .
If you want to make detailed edits, touch <EDIT>
in the section that you want to edit.
Menu Explanation
[E1] Scrolls the cursor up or down.
[E6] Edits the parameter that is selected by the cursor.
(M.COMP)
Edits the corresponding parameter. (The
[E2]–[E6] corresponding parameter changes depending on
(M.EQ)
the position of the cursor.)
6 .
Move the cursor to the desired parameter, and
edit the value.
NOTE
The edited effect settings are temporary. They will be lost if you
turn off the power, or if you select another scene. If you want to
keep the settings, save the system settings.
Editing the Effects
69 69