Using The Synth Ctrl - Roland Fantom-06 Reference Manual

Using the SYNTH CTRL

Using the SYNTH CTRL
Use the FILTER section knobs and buttons to change the sound
in real time. You can use the buttons in the OSC, AMP, FX and LFO
sections to jump to the settings screen for each section.
1 .
Select the scene that you want to play.
2 .
Operate the edit knobs and buttons to edit the
sound.
The edited parameter and its value appear in a popup
window.
OSC (Oscillator) section
This selects the waveform that determines the character of
the sound.
Controller Explanation
[OSC] button Displays OSC PRM in the TONE EDIT screen.
FILTER section
This specifies the brightness and thickness of the sound.
Controller Explanation
Adjusts the cutoff
[CUTOFF] knob frequency of the
filter.
Specifies the
resonance of filter.
This adds a
[RESONANCE] knob
distinctive
character to the
sound.
Specifies the type of filter.
[FILTER TYPE] button
The filter response changes according to
the type you select.
Accesses the FILTER setting screen of the
[PARAM] button
TONE EDIT ZOOM screen.
AMP section
This specifies time-varying changes in pitch, tonal character,
and volume.
Controller
[AMP] button
FX section
This applies various effects to the sound.
Controller
[FX] button
NOTE
Unlike when using the general-purpose controllers, the changes
that you make using the edit knobs always apply only to the tone
of the current zone.
If you're using the keyboard to play multiple layered tones, select
the zone that you want to edit as the current zone before you
operate the knobs.
Depending on the tone type, the tone might consist of multiple
partials, but the changes you make using the knobs apply to the
partial that is selected.
For details on how to select a partial and use the various TONE EDIT
screens, refer to "Editing a Tone" (p. 58).
MEMO
¹ If you want to keep an edited tone, save the tone (p. 64).
¹ For details on each parameter, refer to "Parameter Guide"
(PDF).
Type:LPF
RESONANCE
CUTOFF
Explanation
Displays AMP ENV in the TONE EDIT screen.
Explanation
Access the MFX EDIT screen.
49 49