Playing The General-Purpose Controllers; Using The Sliders And Control Knobs - Roland Fantom-06 Reference Manual

Playing the General-Purpose Controllers

Using the Sliders and Control Knobs

You can use the sliders and control knobs to control the pan and
volume of each zone, or assign various functions and parameters to
them as general-purpose controllers.
1 .
Use the [ZONE 1-8/9-16] button to switch the
zones that you want to control (ZONE 1–ZONE 8 or
ZONE 9–ZONE 16).
ZONE9–16
ZONE1–8
2 .
Press a function select button to select the
parameter that you want to control.
Button Explanation
When this is lit, the control knobs adjust
[PAN/LEVEL] button the pan of each zone, and the sliders
adjust the volume of each zone.
When one of these is lit, the control knobs
and sliders adjust the parameters that
are assigned to them by the scene or the
system.
[ASSIGN] button
ASSIGN1
(SCENE)
ASSIGN2
(SYSTEM)
MEMO
¹ The function assignments of ASSIGN 1 are made individually
for each scene.
¹ The function assignments of ASSIGN 2 are common to the
entire system.
[ASSIGN] button
[ASSIGN] button + [PAN/
LEVEL] button
To control PAN/LEVEL
3 .
Press the [PAN/LEVEL] button to make it light.
4 .
Move a control knob or slider.
The pan or volume of the corresponding zone changes.
When you use a control knob or slider to edit a setting, the
edited parameter and its value appears in a popup window.
The popup window automatically closes after a time.
For some parameters, a popup window does not appear.
MEMO
When controlling [PAN/LEVEL], the control knob or slider numbers
correspond to the zone numbers.
To control ASSIGN1
3 .
Press the [ASSIGN] button to make it light.
4 .
Select the current zone.
As necessary, specify the layer as well.
5 .
Move a control knob or slider.
The sound changes according to the assigned function.
MEMO
¹ When using [ASSIGN], operating a control knob or slider
affects the zone(s) that are heard when you play the
keyboard.
¹ If you're using layered settings, multiple zones are affected.
¹ If you're not using layered settings, the current zone is
affected.
By holding down the [SHIFT] button and pressing the
[ASSIGN] button, you can access a setting screen for
assigning parameters or functions. For details, refer to
"Parameter Guide" (PDF) or "System Parameter" (p. 164).
47 47