Note Pad Settings (Note Pad); Control Function Settings (Control); Information About The Fantom Itself (Info) - Roland Fantom-06 Reference Manual

Settings for the Entire FANTOM
Parameter Value
Selects the click sound.
TYPE1
Click Sound
TYPE2
TYPE3
TYPE4
Click Accent
OFF, ON
Switch
Click Output
MAIN, SUB
Assign
Note Pad Settings
(NOTE PAD)
Parameter Value
Zone
Pad1 Zone–
ZONE1–16
Pad16 Zone
Note Number
Pad1 Note
Number–
0 (C-)–127 (G9)
Pad16 Note
Number
Velocity
Pad1
Velocity–
OFF, 1–127
Pad16
Velocity
Control Function Settings
Parameter Value
SYS
Control
Source Select
SCENE
System OFF, CC01–31,
Control 33–95, BEND,
Source1–4 AFT
170 170
Explanation
Conventional metronome sound (first
beat is a bell)
Click sound
Beep sound
Cowbell sound
Adds an accent to the click sound.
Specifies whether the click sound is
output from the MAIN OUTPUT jacks
(MAIN) or from the SUB OUT jack
(SUB).
Explanation
Specifies the zone to which note
messages are sent when you strike the
pads.
Specifies the note number of the note
messages that are sent when you
strike the pads.
Specifies the velocity of the note
messages that are sent when you
strike the pads.
(CONTROL)
Explanation
Use System Control Source 1–4 for
tone control.
Use the scene's Tone Control Source
1–4 settings for tone control.
Specify the MIDI messages that will be
used as system controls.
System Control settings allow you to
specify MIDI messages that will apply
in common to the entire FA, and can
be used for controlling volume, tone,
etc.
You can assign up to four MIDI
messages for this type of control. If
you want to make assignments for
realtime control of the sound and
effects for each tone independently,
use "Matrix CTRL" or "MFX CTRL" For
details, refer to the "Parameter Guide"
(PDF).
Information About the FANTOM Itself
Here you can view the software version of the FANTOM.
Display Explanation
Version Displays the FANTOM's software version.
Build Displays the FANTOM's software build.
(INFO)