Sampling (To Pad); Preparing For Sampling - Roland Fantom-06 Reference Manual

Sampling
The FANTOM lets you create samples by sampling the following
sounds.
¹ Keyboard performance
¹ Sound input from MIC/LINE INPUT L (MONO), R jacks (an
audio device or microphone)
¹ Sound input from the USB COMPUTER port

Preparing for Sampling

1 .
As necessary, connect the device that you want
to sample (an audio device or mic) to MIC/LINE
INPUT L (MONO), R jacks.
2 .
Press the [SAMPLING] button to make it light.
The SAMPLING MENU appears.
3 .
Touch <SAMPLING To Pad>.
The SAMPLING STANDBY screen appears.
MEMO
If there is already a pad sample in the pad to which you're
sampling, the message "Sample Already Exists. Overwrite?" appears.
Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you
want to cancel.
Time counter
SAMPLE PAD display area
Click ON/OFF
AUDIO IN ON/OFF
Menu Explanation
Selects which parameters are set by using
[E1] TRIG/IN
[E2]–[E4].
[E1] = TRIG: AUTO TRIG
Turns AUTO TRIGGER on/off
[E2]
[E1] = IN: MIC/LINE
Selects the input jack to use.
[E1] = TRIG: AUTO TRIGGER LEVEL
[E3] Specifies the AUTO TRIGGER LEVEL
[E1] = IN: (None)
[E1] = TRIG: TEMPO
Changes the click tempo
[E4]
[E1] = IN: REC LEVEL
Set the sampling level.
[E5] CANCEL Cancels the sampling standby state.
[E6] START Starts sampling.
<Click> Turns the click tone on/off.
<Sampling Mode> Selects the sampling mode (input source).
<Format>
Selects the sampling format.
(To Pad)
Level meter
Rec status
4 .
Note that the bank and number of the sample pad
you're sampling are shown in the SAMPLE PAD
display area.
In this example, the BANK 1-1 pad is selected.
5 .
If you want to change the bank and number of the
sample pad, touch <SAMPLE PAD>.
In the SAMPLING DESTINATION (PAD) screen, select the bank
and number of the pad to which you want to sample, and
then select [E6] SELECT.
MEMO
If there is already a pad sample in the pad to which you are
sampling, the message "Sample Already Exists. Overwrite?" appears.
Press [E5] OK if you want to overwrite, or press [E6] CANCEL if you
want to cancel.
6 .
Touch <Sampling Mode> and select the sampling
mode.
Parameter Explanation
Samples the keyboard performance and
the audio input from MIC/LINE INPUT L
KBD+INPUT
(MONO), R jacks and the USB COMPUTER
port.
KBD Samples the keyboard performance.
Samples the audio input from MIC/LINE
INPUT INPUT jacks 1, 2 and the USB COMPUTER
port.
95 95