Table of Contents
Advertisement
Settings for the Entire FANTOM
Parameter
Value
Hold Pedal
Hold Pedal
STANDARD,
Polarity
REVERSE
Continuous
OFF, ON
Hold Pedal
Wheel Settings
(WHEEL 1/2)
Parameter
Value
Wheel Assign
SYS, SCENE
Source
Assignable
Assign the functions controlled by the wheels.
OFF
CC01–31,
Wheel1–2
33–95
Assign
BEND
AFT
Wheel1–2
0–127
Range Min
Wheel1–2
0–127
Range Max
S1/S2 Settings
(S1/S2)
Parameter
Value
S1, S2 Assign
SYS, SCENE
Source
166
166
Explanation
Selects the polarity of the pedal
connected to the PEDAL HOLD jack.
Depending on the model of pedal, the
result of depressing or releasing the
pedal might be the opposite of what
you expect. If so, choose the "REVERSE"
setting. If you're using a Roland pedal
(that has no polarity switch), choose
the "STANDARD" setting.
If this is ON, the PEDAL HOLD jack will
support half-pedaling. If half-pedaling
is enabled, you can connect a damper
pedal (such as the DP-10; available
separately) and use the pedal to
control subtle nuances of the piano
sounds you play.
Explanation
Specifies whether the functions
controlled by the wheels are
determined by the system settings
(SYS) or by the settings of the scene
(SCENE).
No function is assigned.
Controller number 1–31, 33–95
The same effect as moving the pitch
bend lever.
Aftertouch
Specify the lower limit value for the
range of the assigned function.
Specify the upper limit value for the
range of the assigned function.
Explanation
Specifies whether the functions
controlled by the [S1] and [S2] buttons
are determined by the system settings
(SYS) or by the settings of the scene
(SCENE).
Parameter
Value
Assignable
Assign the functions controlled by the [S1] and [S2]
buttons.
OFF
CC01–31,
33–95
BEND DOWN
BEND UP
AFT
MONO/POLY
MFX SW
S1, S2 Switch
EQ SW
Assign
IFX1 SW
IFX2 SW
CHORUS SW
REVERB SW
MASTER
COMP SW
MASTER EQ
SW
VOCODER SW
SCENE DOWN
SCENE UP
DEC
INC
START/STOP
GROUP PLAY
DOWN
GROUP PLAY
UP
SONG LOOP
SW
TFX SW
MASTER KEY
DOWN
MASTER KEY
S1, S2 Switch
UP
Assign
SCALE TUNE
SW
VTW ROTARY
SPEED
VTW ROTARY
BRAKE
VTW ROTARY
SW
VTW
OVERDRIVE
SW
VTW WHEEL
BRAKE
VTW VIB/CHO
SW
VTW
HARMONIC
BAR
Explanation
No function is assigned.
Controller number 1–31, 33–95
The same effect as moving the pitch
bend lever to the left.
The same effect as moving the pitch
bend lever to the right.
Aftertouch
Mono/poly switch is assigned.
MFX on/off is assigned.
EQ on/off is assigned.
IFX1 on/off is assigned.
IFX2 on/off is assigned.
CHORUS on/off is assigned.
REVERB on/off is assigned.
MASTER COMP on/off is assigned.
MASTER EQ on/off is assigned.
VOCODER on/off is assigned.
Switches to the scene of the previous
number. When using a scene chain,
switches to the previous number
within the chain set.
Switches to the scene of the next
number. When using a scene chain,
switches to the next number within
the chain set.
Applies the same effect as pressing the
panel [DEC] button.
Applies the same effect as pressing the
panel [INC] button.
Plays back the sequencer.
Selects the previous group in the
group list.
Selects the next group in the group
list.
Turns the song loop on/off.
Turn the TFX on/off.
Adjusts the Master Key Shift value by
-1.
Adjusts the Master Key Shift value by
+1.
Turns the SCALE TUNE on/off.
Alternates between SLOW and FAST.
Alternately switches the brake on/off
for the rotary effect.
Turns the rotary effect ON/OFF.
Turns the overdrive ON/OFF.
Alternately switches the brake on/off
for the tonewheel.
Lets you switch the vibrato and chorus
on/off.
You can also use the sliders as
harmonic bars on other screens
besides the edit screen.
Settings can be made for only the
[S1]–[S3] buttons.
Advertisement
Table of Contents
