Security Of The Terminal - Ingenico iWL 25 Wireless Series User Manual

Terminal User Guide

Security of the Terminal

This device fulfils current applicable PCI PTS security requirements. Upon receipt
of the terminal you should check for signs of tampering of the equipment. It is
strongly advised that these checks are performed regularly after receipt. Check, for
example: that the keypad is firmly in place; that there is no evidence of unusual
wires that have been connected to any ports on the terminal or associated
equipment, the chip card reader or any other part of the terminal. Such checks
would provide warning of any unauthorised modifications to the terminal, and other
suspicious behaviour of individuals that have access to your terminal. The terminal
detects any "tampered state". In this state the terminal will repeatedly flash the
message "Irruption!" and further use of the terminal will not be possible. If the
"Irruption!" message is observed, contact the terminal helpdesk immediately.
It is strongly advised that privileged access to the terminal is only granted to staff
that have been independently verified as being trustworthy.
The terminal must never be put in or left at a location where it could be stolen or
replaced by another device.
Page 93 iWL250 User Guide
Copyright© 2019 Ingenico