Ingenico iWL 25 Wireless Series User Manual page 78

Terminal User Guide
Third Supervisor Menu Screen
Fourth Supervisor Menu Screen
Page 77
(press Menu twice)
Allows the international dialling code to be
set. Do not use this feature unless
INTL
instructed to do so by the terminal
Helpdesk.
Allows the default transaction type to be
set, so the transaction type will begin as
soon as a card is swiped or inserted from
SALETYPE
the idle screen. If REFUND is set then the
Supervisor password check will not be
done.
Allows the setting of internal terminal
options. Do not use this feature unless
TERM PARAM
instructed to do so by the terminal
Helpdesk.
Immediately sets off a software upgrade
call to the Terminal Management System
UPGRADE (TMS). Do not use this feature unless
instructed to do so by the terminal
Helpdesk.
(press Menu three times)
Allows the date and time to be set. The date
DATE TIME and time is automatically updated when a
successful TMS call is made.
Allows the setting of the time taken after a
BACKLIGHT
key is pressed before the backlight turns off.
Allows the setting of the time taken after a
AUTO-OFF key is pressed before the terminal enters
power save mode.
Prints a summary report of software
versions loaded on the terminal. Do not use
RELEASE
this feature unless instructed to do so by the
terminal Helpdesk.
iWL250 User Guide
Copyright© 2019 Ingenico