Ingenico iWL 25 Wireless Series User Manual page 81

Terminal User Guide
First Config Menu Screen
To access the Shortcut menu press the Menu key twice, then choose
SUPERVISOR and press green key you will be asked to type your current
supervisor password, and confirm this by pressing the green key. Press the Menu
key and choose SHORT CUT.
Below is a summary of the functions within the Shortcut menu, how to access them
and what they do.
Some Supervisor functions MUST only be used when instructed
to do so by the terminal Helpdesk.
Shortcut Menu Screen
Page 80
Prints EMV data loaded on the
terminal. Do not use this feature
PRINT EMV
unless instructed to do so by the
terminal Helpdesk.
Prints Certificates loaded on the
terminal. Do not use this feature
PRINT
CERTS unless instructed to do so by the
terminal Helpdesk.
Allows the telephone network (PSTN)
PSTN
PREFIX prefix number to be set.
Prints a rolling data sheet of the
mobile network. Do not use this
GSM N/W
TEST feature unless instructed to do so by
the terminal Helpdesk.
Allow the selection of a different
mobile network. Do not use this
SEL GSM
N/W feature unless instructed to do so by
the terminal Helpdesk.
iWL250 User Guide
Copyright© 2019 Ingenico