Steps
1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
side
cover.
3. Follow the procedure in
Memory
Removing the memory
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
5. Remove the
3.5-inch
6. Remove the
hard-drive and optical-drive
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
bracket.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Removing and installing components
39
Need help?
Do you have a question about the Precision 3460 Small Form Factor and is the answer not in the manual?
Questions and answers