Processor Fan And Heat-Sink Assembly; Removing The Processor Fan And Heat-Sink Assembly - Dell Precision 3460 Small Form Factor Service Manual

Steps
1. Press the release tab and slide the speaker in the slot on the chassis until it snaps into place.
2. Route the speaker cable through the routing guide on the chassis.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Processor fan and heat-sink assembly

Removing the processor fan and heat-sink assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following image indicates the location of the processor fan and heat-sink assembly and provide a visual representation of
the removal procedure.
54 Removing and installing components
after working inside your
before working inside your
computer.
computer.