Removing The Dell Ultra Speed Drive - Dell Precision 3460 Small Form Factor Service Manual

Steps
1. Align the graphics card with the PCIe slot on the system board.
2. Using the alignment post on the PCIe slot, connect the card in the connector and press down firmly.
3. Ensure that the card is firmly seated.
4. Close the PCIe door.
Next steps
1. Install the side cover.
2. Follow the procedure in

Removing the Dell Ultra Speed Drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 45