Hard Drive; Removing The 2.5-Inch Hard Drive - Dell Precision 3460 Small Form Factor Service Manual

Steps
1. Position the front bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Hard drive

Removing the 2.5-inch hard drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 2.5-inch hard-drive assembly and provide a visual representation of the
removal procedure.
16 Removing and installing components
after working inside your
before working inside your
computer.
computer.