Hard-Drive And Optical-Drive Supporting Bracket; Removing The Bay Support Bracket - Dell Precision 3460 Small Form Factor Service Manual

Hide thumbs Also See for Precision 3460 Small Form Factor:

Setup and specifications (23 pages)

Service manual (99 pages)

Table Of Contents

Table of Contents

Steps

1. Align the notch on the memory with the tab on the memory-module slot.

2. Slide the memory firmly into the slot and press the memory module down until it clicks into place.

NOTE:

If you do not hear the click, remove the memory module and reinstall it.

3. Close the memory module door and press down firmly till it clicks in place.

Next steps

1. Install the

hard-drive and optical-drive

2. Install the

3.5-inch

hard-drive.

3. Install the

2.5-inch

hard-drive.

4. Install the

front

bezel.

5. Install the

side

cover.

6. Follow the procedure in