Supportassist Diagnostics - Dell Precision 3460 Small Form Factor Service Manual

Thermal pad for solid-state drive
While replacing the serviceable system board, you can reuse the nonadhesive thermal pad for solid-state drive from the old
system board.
Intel System Agent Enhanced Speed Step (SAGV) always disabled
All systems will have SAGV disabled by default. If enabled, systems will incur additional boot time when memory is added or
swapped.
System board TPM settings through BIOS
When the system board is replaced, by default the TPM is enabled and this is applicable for most of the computers in the rest
of the world. Select the Enable Firmware/Integrated TPM - For Regional Restrictions option, this option permanently
disables the Discrete Hardware TPM and applicable for China region.

SupportAssist diagnostics

About this task
The SupportAssist diagnostics (previously known as ePSA diagnostics) performs a complete check of your hardware. The
SupportAssist diagnostics is embedded in the BIOS and is launched by it internally. The SupportAssist diagnostics provides a set
of options for particular devices or device groups. It allows you to:
● Run tests automatically or in an interactive mode.
● Repeat tests
● Display or save test results
● Run thorough tests to introduce additional test options and provide extra information about the failed device(s)
● View status messages that indicate if the tests are completed successfully
94 Troubleshooting