Omron S82K Manual page 5

S82K
Specifications Table
– continued from previous page
Item
Addi- Overload
tional
protection
func-
tion
Overvoltage
protection (see
note 6)
Undervoltage
alarm indicator
(DC LOW indica-
tor)
Undervoltage
alarm output (DC
LOW output)
Parallel operation
Note: 1. Defined with a 100% load and the rated input voltage (100 or 200 VAC).
2. The output specification is defined at the power supply output terminals.
3. The settings for the output voltage must be within the following range:
+V: 1% of the rated value
–V: 5% of the rated value
4. When using the 7.5-W single-output models within the input voltage range between 90 and 110 VDC, the protection function will
operate at a current of 95% to 160% of the rated load current.
5. When the ambient temperature exceeds 25 C, the overload protection function will operate at a current of 92% to 111% of the
rated load current.
6. Circuit-breaker type. To reset, turn the input power supply OFF, then after 1 min has elapsed, turn the input power supply ON
again.
Non–PFC models
Single output Dual Single output
outputs
3 W 7.5 W 7.5 W 15 W
105% to 160% 105% 105% to 160% of rated load
of rated load to current, automatic reset
current, auto- 250%
matic reset of rated
(see note 4) load
current,
auto-
matic
reset
No
Yes (color: red)
No
Impossible
(This table continues on the next page.)
30 W 50 W 90 W
101%
to
111%
of rated
load
current,
auto-
matic
reset
(see
note 5)
Yes
Possible (2 units max.)
S82K
PFC model
100 W 240 W 240 W
105% to 160% of rated load cur-
rent, automatic reset
S82K- No
24024T
model
only
S82K- No
24024T
model
only
S82K- No
24024T
model
only
5