Table of Contents
Advertisement
Planning Your Installation
Determine the Circuit Breaker
Requirements
To determine the type of upstream circuit
breaker you need, examine the distribution
panel or circuit breaker box to identify the
amperage available at the installation site.
The Wall Connector has an internal rotary
switch that allows you to adjust its operating
current (refer to Set the Operating Current on
page 21). The circuit breaker should be rated
for the continuous current of: 12, 16, 20, 24, 28,
32, 36, 40, 48, 56, 64, 72, and 80A.
Choose the Best Location for the
Wall Connector
Determine the parking location of the vehicle
to ensure that the charge cable reaches the
charge port.
•
In an enclosed garage, typically on the
vehicle's charge port side.
•
In a well-ventilated area. Avoid installation
in an enclosed box, or adjacent to hot
appliances.
Note: The Wall Connector is approved for
outdoor use. Protection from rain is
recommended but not required.
10
Advertisement
Table of Contents
