1.4 Manufacturer's data and identification of the valve
Important
Do not change the data on the identification plate.
Keep the ID plates clean, intact and legible as regards the data they contain.
If the ID plate is damaged or is no longer legible (even just one informative element on it) contact the
Manufacturer for a new ID plate and replace it.
The ID plates shown identify the valve concerned and its main components.
The plates show the reference necessary for operating safety.
Year
WAMGROUP
8
7
WAM S.p.A. via Cavour 338-Ponte Motta / Cavezzo (MO) - ITALY
TYPE:
1
Serial N0.:
2
Factory Setting
Different setting
+500 mmH2O
+300 mmH2O
-50 mmH2O
+800 mmH2O
-100 mmH2O
4
5
ID plate is placed on the Excess Pressure Lid, under the Weather Protection Cover.
1.5 Request for assistance
For all technical assistance, contact the Manufacturer's service network.
For all requests, provide the valve identification data, the type of problem encountered and all other information
which could be useful for identifying the problem.
1.6 Warranty
The conditions for validity and applicability of the warranty are specified in the sales contract.
1.0 GENERAL INFORMATION
Spring colour
Green
Red
Yellow
6
3
COD: 063001722
VCP
1) Type of valve
2) Serial No.
3) Code
4) Factory setting
5) Standard setting
6) Characteristic colours of springs for standard
settings
7) Manufacturer's name and address
8) Year of manufacture
5
VAL.VCP.--.M.A5.1017.EN
10.17
2
Issue: A5