Exclusion Of Responsibility - WAMGROUP VCP R03 Series Assembly And Main Instructions For Use And Maintenance

1.7 Exclusion of responsibility

The valve is delivered according to the specifications indicated by the Buyer in the order and the conditions
valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
valve if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, mainte-
nance etc. have not been carried out in compliance with the warnings described in this Manual, and in accord-
ance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the valve concerned is used:
- improperly;
- by unauthorized persons and/or persons not sufficiently trained for installation, operation and maintenance;
- with modifications made to the original configuration without the Manufacturer's permission;
- with spare parts that are not original or are not specific for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
valve.
VCP
1.0 GENERAL INFORMATION
6
VAL.VCP.--.M.A5.1017.EN
10.17
2
Issue: A5