Table of Contents
Advertisement
3.9 Safety and information signs
Danger - Warning
Follow the signs on the plates.
The plates have to be readable; if they are not, clean them, replace the damaged ones and place them
in their original position.
NB: See page 2, 1.2 Symbols
3.10 Safety devices
The access to the internal parts of the valve is forbidden during operation.
Extraordinary access is provided for removing foreign bodies and material deposits from inside the valve or for
extraordinary maintenance.
For accident prevention it is essential to keep the valve out of personnel reach during operation. To this pur-
pose, the customer has to provide suitable safety devices such as grids, as well as protective inlet and outlet
joints (either robust flexible sleeves or rigid pipe unions). However, the installer has to avoid that, even inad-
vertently, a person remains harmed (by employing suitable hopper, safety grilles,...).
When using movable safety devices, provide protection limit switches, which stop the valve instantaneously
if the protection is opened or removed. Restarting of the valve must only be possible when the protection is
effective again (according to EN 1088).
VCP
3.0 TECHNICAL INFORMATION
15
VAL.VCP.--.M.A5.1017.EN
10.17
2
Issue: A5
Advertisement
Table of Contents
