Table of Contents
Advertisement
2.3 Safety prescriptions for installation
Before starting with installation, a "Safety Plan" must be implemented to safeguard the personnel di-
rectly involved and those who carry out operations in the surrounding area.
All the laws must be strictly applied, especially those concerning workplace safety.
Before proceeding with installation operations, mark off the work area to prevent access by unauthor-
ized persons.
The electrical connections must be made in compliance with the standards and laws in force.
The person in charge of making the electrical connections has to ensure that the required standards
and laws are respected before testing.
2.4 Safety prescriptions for use and operation
Do not tamper with the valve concerned by using any kind of device to obtain performances different
from those designed.
All unauthorized changes can affect the health of people and the integrity of the valve.
The operators have to exclusively wear protective clothing and have to be equipped with appropriate
individual protection devices for carrying out the operations and as required by the safety and work
accident prevention standards.
Before use, ensure that all the safety devices are installed and that they are working properly.
During operations, prevent access to the work area by unauthorized persons.
Remove all obstacles or sources of danger from the work area.
It is strictly forbidden placing any improper load on the valve.
2.5 Safety prescriptions for maintenance and replacement of components
Danger - Warning
Before carrying out any operation on the valve concerned, ensure it is switched off and disconnected
from all mains and use suitable devices to prevent the possibility of the power sources being activated
accidentally.
Maintain the valve concerned in the conditions of utmost efficiency compliant with the maintenance
plan provided by the Manufacturer.
Good maintenance apart from preserving the functional features and essential safety features over
time, will also allow extending the working life of the valve concerned and achieving the best possible
performance.
Strictly follow the procedures indicated in the Manual, especially those concerning safety.
Ensure that all the safety devices are active and working properly.
Mark off the work area in such a manner as to prevent the access of unauthorized persons.
Replace the worn and damaged components exclusively with original spare parts, whose safety, reli-
ability and interchangeability have been undoubtedly established.
VCP
2.0 INFORMATION REGARDING SAFETY
8
VAL.VCP.--.M.A5.1017.EN
10.17
2
Issue: A5
Advertisement
Table of Contents
