Manufacturer's Data And Identification Of The Valve; Request For Assistance; Warranty - WAMGROUP TOREX VM Series Assembly And Main Instructions For Use And Maintenance

1.4 Manufacturer's data and identification of the valve

Important
Do not change the data on the identification plate.
Keep the ID plates clean, intact and legible as regards the data they contain.
If the ID plate is damaged or is no longer legible (even just one informative element on it) contact the
Manufacturer for a new ID plate and replace it.
1) Manufacturer's name and address
2) Serial No.
3) Machine model
4) Max. operation pressure
5) Max. closing pressure
6) Differential pressure meter
The ID plates shown identify the equipment concerned and its main components.
The plates show the reference necessary for operating safety.

1.5 Request for assistance

For all technical assistance, contact the Manufacturer's service network.
For all requests, provide the valve identification data, the type of problem encountered and all other information
which could be useful for identifying the problem.

1.6 Warranty

The conditions for validity and applicability of the warranty are specified in the sales contract.
1.0 GENERAL INFORMATION
R
R
TOREX SpA
3
Year: 2018
Type: VM
Operating pressure max 3.5 bar
4
Controll pressure max 6 bar
Differential pressure 2 to 2.5 bar
5
Batch No: 22- 11- 18- 09
6
VM
1
R
Via Canaletto, 139/A
MEMBER OF
41030 S.Prospero (MO)
WAMGROUP
ITALY
+39/0598080811
R
2
4
TOR.VM.--.M.A.0518.EN Issue: A
05.18
2