4
SD CARD
■ About the SD card's folder contents
When inserting an SD card, folders will be created as
shown below. You can browse or edit the contents on
your PC.
ID-RP3
Firmware folder:
Saves the "dat" format firmware data when updating
the repeaterʼs firmware.
L Only one firmware data file must be saved in the folder.
Setting folder:
Saves the repeater's setting data in the "icf" format.
L The repeaterʼs setting data will be saved as
"SetYYYYMMDD_XX.icf."
L When writing the programmed data to the repeater, save
it with the file name "Setting.icf".
Speech folder:
Saves the voice data used for reading out callsign in
the "wav" format.
L The dataʼs filename must be "Speech.wav."
L The voice data cannot be backed up from the repeater to
an SD card.
Firmware
Setting
Speech
11