Intended Use; Applications; Use And Operation Solely With The Following Machines - EWM Drive 4 Basic S Operating Instructions Manual

Intended use

Applications

3 Intended use
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.1 Applications
MMA welding system for GMAW-pulse and standard welding as a MMA welding secondary process. It
may be possible to expand the range of functions by using accessories (see the documentation in the
relevant chapter).
3.2

Use and operation solely with the following machines

A suitable wire feed unit (system component) is required in order to operate the welding machine!
The following system components can be combined:
Taurus xx5 Basic S
Taurus xx5 Steel Synergic S
Taurus xx5 Steel puls S
12
WARNING
Drive 4X / D200 Drive 4X / D200
Basic S Steel Synergic S
Drive 4X / D200
Steel puls S
099-005593-EW501
10.01.2022