6
Access Service Information and Settings
View system performance, operation, and fault data
Cartridge performance and fault data
Go to the Cartridge Data screen (CARTRIDGE DATA) to see information about the Hypertherm
cartridge that is installed on the torch.
1. Select
2. Select
3. Turn the adjustment knob to scroll down and see the CARTRIDGE DATA 2 screen.
P/N – This field shows the part number (nnnnnn) and the version (X) of the Hypertherm cartridge.
NAM – This field shows the Hypertherm cartridge type.
C HAND = Standard cutting cartridge for hand torch
C HFNC = FineCut cartridge for hand torch
C MECH = Standard cutting cartridge for machine torch
C MFNC = FineCut cartridge for machine torch
C FLUSH = FlushCut cartridge
G RMVL = Maximum Removal gouging cartridge
G CNTL = Maximum Control gouging cartridge
136
on the main menu screen.
to go to the CARTRIDGE DATA 1 screen.
810430
Troubleshooting Guide
Powermax65/85/105 SYNC