Table of Contents
Advertisement
10 BACnet Protocol Implementation Conformance Statement
• Compatible communication options are different for different models. Refer to the drive manuals for more
information.
Option
*1
*1
PG-B3
, PG-X3
*1 *3 *4
PG-RT3
, PG-F3
DO-A3, AO-A3
SI-C3, SI-N3, SI-P3, SI-S3, SI-T3, SI-ET3,
SI-ES3, SI-B3, SI-M3,
*4
*4
SI-W3
, SI-EM3
, SI-EN3
JOHB-SMP3,
*5
*5
AI-A3
, DI-A3
*1
Not available for FP605 drives.
*2
To connect two PG options, use the CN5-C and CN5-B connectors. To connect only one PG option, use the
CN5-C connector.
*3
If you use the motor switching function, you cannot use this option.
*4
Not available for 1000-Series drive models with capacities between 450 and 630 kW (650 to 1000 HP).
*5
To use AI-A3 and DI-A3 input statuses as monitors, connect the options to CN5-A, CN5-B, or CN5-C.
10
BACnet Protocol Implementation Conformance Statement
Date: 06/01/2016
Vendor Name: Yaskawa
Product Name: AC Motor Controller
Product Model Number: SI-B3
Application Software Version: VST80026x Firmware Revision: 1.8 BACnet Protocol
Revision: 4
Product Description: The Yaskawa SI-B3 BACnet option connects a 1000-series drive to
a
standard BACnet MS/TP network. The drive may be fully controlled and monitored over
BACnet. All drive parameters are available for reading and writing.
BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
■BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
56
Table 9.1 Option Compatibility
*1 *3 *4
*4
, SI-EP3,
YASKAWA TOEP YAICOM 22A BACnet MS/TP Installation & Technical Manual
Connector
CN5-B, C
CN5-C
CN5-A, B, and C
CN5-A
Number of Options
Possible
*2
2
1
1
1
Advertisement
Table of Contents
