STAT
SQL
CH1/CH2
ON
OFF
6.1.17. Displaying the Laser Status
To display the laser status, select the STAT menu item in the first menu level, then use the toggle switch
to display the LASR option and press the pushbutton to select it.
STAT
LASR
CH1/CH2
OK
OFF
FALT
6.1.18. Displaying the LNB Voltage Level
To display the LNB Voltage, select the STAT menu item in the first menu level, then use the toggle switch
to display the LNBV option and press the pushbutton to select it.
STAT
LNBV
CH1/CH2
18V
13V
OFF
6.1.19. 22KHz Tone Status
To display the 22KHZ tone status, select the STAT menu item in the first menu level, then use the toggle
switch to display the 22KT option and press the pushbutton to select it.
STAT
22KT
CH1/CH2
ON
OFF
6.1.20. Displaying the LNB Current
To display the LNB Current, select the STAT menu item in the first menu level, then use the toggle switch
to display the LNBC option and press the pushbutton to select it.
7807LT-2 Dual Wideband RF Fiber Transmitter
Squelch mode enabled.
ON
Squelch mode disabled.
OFF
Laser is operating normally.
OK
Laser is disabled.
OFF
Fault in laser operation.
FALT
Indicates the LNB output voltage.
Indicates whether the 22KHz tone on LNB output is enabled or disabled.
22KHz tone is enabled.
ON
22KHz tone is disabled.
OFF
Revision 1.2
7700/7800 MultiFrame Manual
Page - 23