Displaying The Status Of Input Video Embedded Audio Groups; Displaying The Aes Audio Sample Rate; Displaying The Received Optical Power - evertz 7700 Manual

Multi-signal hd/sd, aes, and control fiber transmitter
Hide thumbs Also See for 7700:
Table of Contents

Advertisement

7700 Multi-Frame Manual
7707MT-HD Multi-Signal HD/SD, AES, and Control Fiber Transmitter

4.2.3. Displaying the Status of Input Video Embedded Audio Groups

The 7707MT-HD allows the user to monitor the status of input video embedded audio groups. This allows
conflicts to be identified and resolved. To view the current status of input video embedded audio groups,
select the STAT (Status) menu item in menu level 1, followed by the VIN (Video Input) and GRP1, GRP2,
GRP3 or GRP4 (Audio Groups 1 through 4) menu items.
STAT
VIN
GRP1-GRP4
FREE
USED
CLN
LOS

4.2.4. Displaying the AES Audio Sample Rate

The 7707MT-HD can detect the sample rate of valid AES input audio on each channel, which can be
reported to the display. To indicate the AES input sample rate, select the STAT (Status) menu item in
menu level 1, followed by the AIN1, AIN2, AIN3, or AIN4 (Audio Input 1 through 4) menu item. The
following list describes possible Audio Sample Rate indications:
STAT
AIN1-AIN4
32K
44K
48K
LOS

4.2.5. Displaying the Received Optical Power

STAT
PWR
-1 to -40
OVR
LOW
Page-16
The monitored audio group is unused in applied input
FREE
video.
The monitored audio group is used in applied input video.
USED
The monitored audio group is used in applied input video,
CLN
but has been cleaned by the 7707MT-HD.
No video input detected.
LOS
AES input sample rate is 32KHz.
32K
AES input sample rate is 44.1KHz.
44K
AES input sample rate is 48KHz.
48K
Loss of signal. No valid signal is detected.
LOS
-40 to -1
Power monitoring range (in dBm units) for the standard
optical receiver option.
-40 to -7
Power monitoring range (in dBm units) for the high
sensitivity (-H) optical receiver option.
Received optical power is greater than maximum.
OVR
CAUTION: Never exceed the maximum specified optical
input power for the specific product option that you
posses. See section 3.7 for optical input specifications.
Exceeding the maximum optical input power can
permanently damage the optical receiver.
Received optical power is less than –40dBm.
LOW
Version 1.5

Advertisement

Table of Contents
loading

This manual is also suitable for:

7707mt-hd

Table of Contents