Liability Claims/Warranty; Advice For Disposal / Options Of Reuse - Optimum Optimill MH 50G Operating Manual

Hide thumbs Also See for Optimill MH 50G:
Table of Contents

Advertisement

Available languages

Available languages

7.4

Liability claims/warranty

Besides the legal liability claims for defects of the customer towards the seller, the manufac-
turer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not
grant any further warranties unless they are listed below or were promised as part of a single
contractual provision.
Liability or warranty claims are processed at OPTIMUM GmbH's discretion either directly or
through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by
components which are free from defects. Title to replaced products or components is trans-
ferred to OPTIMUM Maschinen Germany GmbH.
The automatically generated original proof of purchase which shows the date of purchase, the
type of machine and the serial number, if applicable, is the precondition in order to assert liabil-
ity or warranty claims. If the original proof of purchase is not presented, we are not able to per-
form any services.
Defects resulting from the following circumstances are excluded from liability and warranty
claims:
Use of the product beyond the technological capability and intended use, in particular due
to overloading of the machine.
Damage caused personally through incorrect use or failure to observe our operating
instructions,
negligent or incorrect handling and use of improper operating materials.
Unauthorized modifications and repairs.
Insufficient installation and safeguarding of the machine.
Disregarding the installation requirements and conditions of use.
Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences.
Neither are the following items covered by liability or warranty claims:
Wearing parts and components which are subject to normal and intended wear, such as V-
belts, ball bearings, lighting, filters, seals, etc.
Non reproducible software errors
Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any addi-
tional warranty are neither an acceptance of the defects nor an acceptance of its obligation to
compensate. These services neither delay nor interrupt the warranty period.
The court of jurisdiction for legal disputes between businessmen is Bamberg.
If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a provi-
sion which nearest approaches the intent of the guarantor and remains within the framework of
the limits of liability and warranty which are specified by this contract is deemed agreed.
7.5

Advice for disposal / Options of reuse:

Please dispose of your equipment in an environmentally friendly manner, by not placing waste
in the environment but in a professional manner.
Please do not simply throw away the packaging and later the disused machine, but dispose of
both in accordance with the guidelines laid down by your city council/local authority or by an
authorised disposal company.
Version 1.0.5 - 2021-01-29
Translation of original instruction
MH50G│MH50V
EN
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optimill mh 50v33381803338185

Table of Contents