NetApp AFF A200 System Documentation page 511

command from the surviving cluster.
controller_A_1::> metrocluster heal -phase aggregates
[Job 130] Job succeeded: Heal Aggregates is successful.
If the healing is vetoed, you have the option of reissuing the
-override-vetoes parameter. If you use this optional parameter, the system overrides any soft vetoes that
prevent the healing operation.
4. Verify that the operation has been completed by using the metrocluster operation show command.
controller_A_1::> metrocluster operation show
Operation: heal-aggregates
State: successful
Start Time: 7/25/2016 18:45:55
End Time: 7/25/2016 18:45:56
Errors: -
5. Check the state of the aggregates by using the
controller_A_1::> storage aggregate show
Aggregate
Status
--------- -------- --------- ----- ------- ------ ----------------
------------
...
aggr_b2 227.1GB
raid_dp, mirrored, normal...
6. Heal the root aggregates by using the
mcc1A::> metrocluster heal -phase root-aggregates
[Job 137] Job succeeded: Heal Root Aggregates is successful
If the healing is vetoed, you have the option of reissuing the
-override-vetoes parameter. If you use this optional parameter, the system overrides any soft vetoes that
prevent the healing operation.
7. Verify that the heal operation is complete by using the
the destination cluster:
508
Size Available Used% State
227.1GB
metrocluster heal -phase root-aggregates
metrocluster heal
storage aggregate show
#Vols
0% online 0 mcc1-a2
metrocluster heal
metrocluster operation show
command with the
command.
Nodes
command.
command with the
command on
RAID