Solid Back And Seat Insert - Sunrise Medical Zippie TS Owner's Manual

E N G L I S H
U. SEAT DEPTH
1. Pivot Plate Adjustment (Fig. 27)
a) Remove the bolts (A) securing the back rest pivot plate (B) onto the tilt seat tube.
b) Position the backrest pivot plate in the desired pre-drilled holes on the tilt seat tube.
c) Replace bolts and tighten securely.
NOTE–
A rear frame extension is available for 15" and 16" depths from your authorized Sunrise supplier.
2. Tilt-in-Space Tube Adjustment (Fig. 28)
a) Remove the bolts (A) from the tilt brackets and strut saddles.
b) Move the tilt seat tube (B) to position the proper frame holes according to the matrix
(C) for the tilt bracket.
c) Replace and tighten bolts.
NOTE–
Adjusting the position of the tilt seat tube will affect the chairs center of gravity and may require
you to adjust the casters to a trailing or forward position (see section "P . Caster Forks").
Depths (in.)
Frame Solid Seat
Depth Depth
13 11
14 12
15 13
16 14
17 15
18 16
19 17
20 18
V. SOLID BACK AND SEAT INSERT
1. Attaching/Removal
a) Position seat and back on the frame.
b) Position clamps on the seat base and backposts.
c) Insert the quick-release pins (A) through the mounting holes on both the base and back-
posts.
d) Remove the seat by reversing the above process.
NOTE–
May be equipped with Jay Fit or Conventional seating (see instructions from seating Owner's
Manual).
W. TILT-IN-SPACE
1. Tilt Adjustment (Fig. 30)
a) Remove trigger release pin (A).
b) Depress the lock lever handle (B), position to desired tilt, and release handle.
c) Replace trigger release pin
2. Tilt-in-Space Mechanism Adjustment (Fig. 31)
a) Rotate the jam nut (A) clockwise.
b) Turn the cable adjuster piece (B) until looseness is removed from cable.
c) Tighten jam nut.
NOTE–
Adjustments to tilt-in-space mechanism are recommended to be made by authorized Sunrise suppliers.
XXXXXXX Rev. A
(Fig. 27, 28)
Hole Positions
Back Plate Pivot
Position Position
2+4 1
3+5 1
4+6 1
5+7 2
6+8 2
7+9 2
8+10 3
9+11 3
(Fig. 30, 31)
MechLok Strut Rear Strut
Position Tube Position
A 6
A 7
A 8
B 9
B 9
B 10
C 11
C 7
(Fig. 29)
18
B
A
Seat Depth Adjustment
Tilt-in Space Adjustment
A
B
Solid Back and Seat
B
A
Tilt Adjustment
B
A
Tilt-in-Space Mechanism
I X .
27
28
29
30
31