Solid Back And Seat Insert; Tilt-In-Space - Sunrise Medical Zippie TS Manual

Hide thumbs Also See for Zippie TS:

Table of Contents

Z IPPI E T S

V. SOLID BACK AND SEAT INSERT

1. Attaching/Removal

a. Position seat and back on the frame.

b. Position clamps on the seat base and backposts.

c. Insert the quick-release pins (A) through the mounting holes on both the base and backposts.

d. Remove the seat by reversing the above process.

NOTE– May be equipped with JAY Fit or Conventional seating (see instructions from seating Owner's

Manual).

W. TILT-IN-SPACE

1. Tilt Adjustment

a. Remove trigger release pin (C).

b. Depress the lock lever handle (D), position to desired tilt, and release handle.

c. Replace trigger release pin.

2. Tilt-in-Space Mechanism Adjustment

a. Rotate the jam nut (E) clockwise.

b. Turn the cable adjuster piece (F) until looseness is removed from cable.

c. Tighten jam nut.

NOTE – Adjustments to tilt-in-space mechanism are recommended to be made by a Sunrise Medical authorized

dealer.

3. Foot Release

Depressing foot pedal (G) disengages the locking mechanism and allows the seat and back to rotate in

space. Releasing the foot pedal positively locks the rockers in place.

MK-100208 RevB

IX. DEALER SERVICE AND ADJUSTMENT

Table of Contents