Table 1-1: Comparison Between The Data Generator Mode And Pulse Generator Mode - Tektronix DTG5078 User Manual

Comparison

Table 1-1: Comparison between the Data Generator mode and Pulse Generator mode

Items
Data Rate DTG5078:
(DG mode) NRZ only: 50 kbps to 750 Mbps
contains RZ, R1: 50 kbps to 375 Mbps
Frequency
DTG5274:
(PG mode)
NRZ only: 50 kbps to 2.7 Gbps
contains RZ, R1: 50 kbps to 1.35 Gbps
DTG5334:
NRZ only: 50 kbps to 3.35 Gbps
contains RZ, R1: 50 kbps to 1.675 Gbps
Available slots DTG5078: A to H
DTG5274: A to D
DTG5334: A to D
Available windows Channel Group, Blocks, Data-Listing, Data-Waveform,
Level, Timing, Time Base, Sequence, Sub-sequences,
Jitter Generation, DC Output
Channel Grouping Available
Data Format NRZ, RZ, R1
Timing control Delay, Pulse Width, Duty, Slew Rate, Polarity, Cross
Point
Level control High, Low, High Limit, Low Limit, Term.R, Term.V
resolution
Sequence operation Available
Differential Timing Available
Offset
Channel addition AND, XOR
Long delay Available
Jitter range Available
Jitter generation Available
DTG5078 & DTG5274 & DTG5334 Data Timing Generator User Manual 2
The following table compares the Data Generator mode and Pulse Generator mode:
Data Generator mode Pulse Generator mode
DTG5078:
50 kHz to 375 MHz
DTG5274:
50 kHz to 1.35 GHz
DTG5334:
50 kHz to 1.675 GHz
DTG5078: A to D
DTG5274: A to D
DTG5334: A to D
Level, Timing, Time Base, Sequence, Sub-sequences,
DC Output
Not available
Pulse
Delay, Pulse Width, Duty, Slew Rate, Polarity, Pulse
Rate
High, Low, High Limit, Low Limit, Term.R, Term.V
Not available
Available
AND, XOR
Not available
Available
Not available
Comparison
1-3