where 67 is the number of bytes used by the program.
Clearing One or More Programs
To clear a specific program from memory
1. Press
label of the program.
2. Press
3. Press
to cancel the catalog or
To clear all programs from memory:
1. Press
2. Press
3. The message prompts you for confirmation. Press
.
4. Press
Clearing all of memory (
The Checksum
The checksum is a unique hexadecimal value given to each program label and its
associated lines (until the next label). This number is useful for comparison with a
known checksum for an existing program that you have keyed into program
memory. If the known checksum and the one shown by your calculator are the
same, then you have correctly entered all the lines of the program. To see your
checksum:
1. Press
2. Display the appropriate label by using the cursor keys, if necessary.
3. Press and hold
(2)
.
to display program lines (PRGM annunciator on).
() to clear program memory.
to cancel program entry.
()
to display checksum and length.
and display (using
to back out.
()) also clears all programs.
for the catalog of program labels.
Simple Programming
Ø
×
and
) the
Ö
()
13-23