The value of X-, Y-, Z-, T-register in ALG mode is the same in RPN mode. After
normal calculation, solving, programming, or integrating, the value of the four
registers will be the same as in RPN or ALG mode and retained when you switch
between ALG and RPN logic modes.
Integrating an Equation
1. Key in an equation. (see "Entering Equations into the Equation List" in chapter
6) and leave Equation mode.
2. Enter the limits of integration: key in the lower limit and press
in the upper limit.
3. Display the equation: Press
equation list (press
4. Select the variable of integration: Press
calculation.
Operations with Complex Numbers
To enter a complex number:
Form:
1. Type the real part.
6
2. Press
.
3. Type the imaginary part.
Form:
1. Type the real part.
2. Press
.
3. Type the imaginary part.
6
4. Press
.
Form:
1. Type the value of r.
?
2. Press
3. Type the value of
C-8
ALG: Summary
×
Ø
or
) to display the desired equation.
.
.
and, if necessary, scroll through the
variable. This starts the
, then key