Running A Program; Executing A Program (Xeq) - HP 35s User Manual

Running a Program

To run or execute a program, program entry cannot be active (no program–line
numbers displayed; PRGM off). Pressing

Executing a Program (XEQ)


Press label to execute the program labeled with that letter:
To execute a program from it's beginning press
A 
press
start at the top of Label A.
You can also execute a program starting at another position by pressing
label Line number, for example
If there is only one program in memory, you can also execute it after moving pointer
to the top of the program line and pressing
annunciator displays and the
If necessary, enter the data before executing the program.
Example:
Run the programs labeled A and E to find the areas of three different circles with
radii of 5, 2.5, and 2 . Remember to enter the radius before executing A or E.
Keys:
(In RPN mode)
A
E

  
A
13-10
Simple Programming
. The display will show " " and execution will


annunciator turns on while the program is running.
Display:





will cancel Program–entry mode.

label

.

(run / stop) key. The PRGM
Enters the radius, then starts
program A. The resulting area is
displayed.
Calculates area of the second
circle using program E.
Calculates area of the third circle.

. For example,

Description: